Streckfuss    Olamef    Piergiacomi    Depaneling    Cable machines

Machines for wire and cable treatment, cut & strip low cost, strong, reliable

Cable stripping and cutting machines

TSC SERIES

TSC series are automatic cut and strip machines that enables the processing of many different wires in a quick, precise and safe way by using a keyboard.

The whole range starts from the simple cutting machine TSC able to cut every kind of material such as ropes, cables, sheaths, tubes, leather, Teflon etc.,
until arriving to the cutting and stripping electronic machines ­ TSC8 ­ TSC25, TSC35 ­ TSC50 which can process unipolar cables from 0.2 mm² (AWG 37) up to 70mm² (AWG 1), multipolar cables up to 17 mm of diameter (AWG 4/0) and flat cables.

Through TSC machines you can make total, partial or middle stripping on electric cables, saving until 99 codes. We provide with the machines some interchangeable thread guides that allow the precise sliding of the cable.
There is also the possibility to change the stripping blades that easily and precisely allow to switch from round to flat cables.
TSC machines are equipped with all the safety requirements and they are compliant with CE regulations.

MGR TSC8     Documentation TSC8
Cutting and stripping machine, wire, cable ...
The possibility of working a wide range of cables (single-pole, multi-pole, flat plates) of different sizes and to cut tubes to size etc. make TSC8 the most versatile electronic cut and strip machine on the market. As with the smaller model TSC8 and the greater one TSC50 you have the option of storing up to 99 programs with different lengths, sections and wire processing and which can be recalled when you need.
Equipped with 3 interchangeable wire guide, if accompanied with appropriate blades and wire guides TSC8 can switch from working round cables to processing flat cable in a very easy and quick way.

TECHNICAL FEATURES:
  • Power supply voltage: 230V / 50Hz (1P + N)
  • Total nominal power: 400W
  • Breaking capacity: 6 KA
  • Voltage control circuit: 24Vdc
  • Class of protection against indirect contact: I
  • Degree of solids and liquids declared protection: IP20
  • Weight: 33 kg
  • Dimensions: 420mm x 450mm x 350mm
  • Display: LCD screen Liquid Crystal Display
  • Cutting length: 1mm - 100 meters
  • Cutting tolerance: = 0.002xL (L = length of cut)
  • Stripping Cable: 0 - 100mm
  • Section: 0.2 to 8 mm² (option 10 mm²)
  • Section cables monoconductor BV/BLV : < 4mm² (option < 6mm²)
  • Maximum internal diameter of the thread guides: 7 mm (option 9 mm)
  • Middle stripping: 10
  • Blade Material: High quality Tungsten
  • Pieces produced per hour: 3.000 - 8.000 pcs / h
  • Degree of mobility: Transportable Equipment
  • Connection to the mains supply: Connector jack panel
    coupe denudage de cable
  • MGR TCS25     Documentation TSC25
    Cutting and stripping machine, wire, cable ...
    The typical features of TSC25 allow the processing of unipolar cables with large sections (up to 25mm²) and permit to obtain considerable stripping of multi-core cables up to 12 mm in diameter (only by managing a machine parameter that allows middle-stripping).
    The possibility to interface TSC25 to our deposit system HTX and to our unwinder UNROAL allows to unwind, process in automated mode and store cables with a considerable length by managing everything from the keyboard.


    TECHNICAL FEATURES:
  • Power supply voltage: 230V / 50Hz (1P + N)
  • Total nominal power: 500W
  • Breaking capacity: 6 KA
  • Voltage control circuit: 24Vdc
  • Class of protection against indirect contact: I
  • Degree of solids and liquids declared protection: IP20
  • Weight: 45 kg
  • Dimensions: 420mm x 450mm x 350mm
  • Display: LCD screen Liquid Crystal Display
  • Cutting length: 1mm - 99.999mm
  • Cutting tolerance: = 0.002xL (L = length of cut)
  • Stripping Cable: Head 0 - 150mm & Tail 0 - 50mm
  • Section: 0.3 to 25 mm²
  • Maximum internal diameter of the thread guides: 12 mm
  • Middle stripping: possible
  • Blade Material: High quality Tungsten
  • Pieces produced per hour: 3.000 - 5.000 pcs / h
  • Degree of mobility: Transportable Equipment
  • Connection to the mains supply: Connector jack panel
    coupe denudage de cable


  • MGR TSC35     Documentation TSC35
    Cutting and stripping machine, wire, cable ...
    The typical features of TSC35 allow the processing of unipolar cables with large sections (up to 35mm²) and permit to obtain considerable stripping of multi-core cables up to 13 mm in diameter.
    The possibility to interface TSC35 to our deposit system HTX and to our unwinder UNROAL allows to unwind, process in automated mode and store cables with a considerable length by managing everything from the keyboard.

    TECHNICAL FEATURES:
  • Power supply voltage: 230V / 50Hz (1P + N)
  • Total nominal power: 800W
  • Breaking capacity: 6 KA
  • Voltage control circuit: 24Vdc
  • Class of protection against indirect contact: I
  • Degree of solids and liquids declared protection: IP20
  • Weight: 57 kg
  • Dimensions: 510mm x 490mm x 360mm
  • Display: LCD screen Liquid Crystal Display
  • Cutting length: 1 mm - 100 meters
  • Cutting tolerance: = 0.002xL (L = length of cut)
  • Stripping Cable: 0 - 150mm maxi
  • Section: 0.5 to 35 mm²
  • Maximum internal diameter of the thread guides: 3 mm
  • Middle stripping: possible
  • Blade Material: High quality Tungsten
  • Pieces produced per hour: 2.000 pcs / h
  • Degree of mobility: Transportable Equipment
  • Connection to the mains supply: Connector jack panel
    cut and strip machine for cable
  • MGR TSC50     Documentation TSC50
    Cutting and stripping machine, wire, cable ...
    The typical features of TSC50 allow the processing of unipolar cables with large sections (up to 70mm²) and permit to obtain considerable stripping of multi-core cables up to 17 mm in diameter.
    The possibility to interface TSC50 to our deposit system HTX and to our unwinder UNROAL allows to unwind, process in automated mode and store cables with a considerable length by managing everything from the keyboard.

    TECHNICAL FEATURES:
  • Power supply voltage: 230V / 50Hz (1P + N)
  • Total nominal power: 1000W
  • Breaking capacity: 6 KA
  • Voltage control circuit: 24Vdc
  • Class of protection against indirect contact: I
  • Degree of solids and liquids declared protection: IP20
  • Weight: 72 kg
  • Dimensions: 510mm x 490mm x 360mm
  • Display: LCD screen Liquid Crystal Display
  • Cutting length: 1 mm - 100 meters
  • Cutting tolerance: = 0.002xL (L = length of cut)
  • Stripping Cable: 0 - 150mm maxi
  • Section: 2.5 to 70 mm²
  • Maximum internal diameter of the thread guides: 17 mm
  • Middle stripping: possible
  • Blade Material: High quality Tungsten
  • Pieces produced per hour: 2.000 pcs / h
  • Degree of mobility: Transportable Equipment
  • Connection to the mains supply: Connector jack panel
    coupe denudage de cable