Burst-und-zick - Machine C 043E Cutting, Stamping and Forming for loose or belted axial components



Streckfuss C 043 E

      Brochure C043E & C043ES
      Spare parts list C043 E & C043ES

Bauteil Bauteil Bauteil
Bauteil Bauteil Bauteil
Bauteil Bauteil Bauteil
Bauteil Bauteil Bauteil Bauteil
Description C043E :

The machine Type C 043 E is designed, to cut stamp and bend axial leaded components for both horizontal and vertical mounting.

To make the insertion of components with short leads into p. c. boards possible, the leads have to be cut to suitable length, bend to the required pitch and -if necessary- stamped. Both, suitable length and required pitch can be adjusted by adjusting screws. After this set-up the components can be processed. Option: the adjustments can be checked by a digital display.

The stamping result for the leads depends on the used tool. These tools can be manufactured to meet customer requirements. The machine can be re-set for the different tools.

The taped components can be processed automatically. The processing-speed is continuously variable. The tool change for different bending dimensions takes about 2 minutes.




Specification
- dimension
840 x 480 x 450 mm
- weight
approx. 45 kg
- electricity
230 V / 50 Hz / 200 W
- bending tool
horizontal and vertical bendings
- pitch mini.
horizontal: 7,5 mm, vertical: 2,5 mm
- pitch maxi.
horizontal : 50 mm, vertical : 5 (7,5) mm
- Ø wire horizontal : 0,4 to 1,3 mm, vertical : up to 0,8 mm
- components in tape
- productivity 8.000 pcs/hr maxi. (adjustable)
- Option - feeder for loose components
- display, counter
- support reel tape and carton ammopack

C043 E



Tape placement

Cut and bend tooling functionning

Run mode