TSC series are automatic cut and strip machines that enables the processing of
many different wires in a quick, precise and safe way by using a keyboard.
The range starts with the TSC-INSIDE for multi-conductor cable stripping, the
TSC8N for cutting and stripping wire
to the TSC50 for stripping large cables which can
process unipolar cables from 0.1 mm² (AWG 24) up to 70mm² (AWG 1),
multipolar cables up to 17 mm of diameter (AWG 4/0) and flat cables.
Through TSC machines you can make total, partial or middle stripping on
electric cables, saving until 99 codes. We provide with the machines some
interchangeable thread guides that allow the precise sliding of the cable.
There is also the possibility to change the stripping blades that easily and
precisely allow to switch from round to flat cables.
TSC machines are equipped with all the safety requirements and they are
compliant with CE regulations.
TSC8N
  
Documentation TSC8N
Cutting and stripping machine, wire, cable ...
The possibility of working a wide range of cables (single-pole, multi-pole,
flat plates) of different sizes and to cut tubes to size etc. make TSC8N the
most versatile electronic cut and strip machine on the market.
As with the smaller model TSC8N and the greater one TSC50 you have the option
of storing up to 99 programs with different lengths, sections and wire
processing and which can be recalled when you need.
Equipped with 3 interchangeable wire guide, if accompanied with appropriate
blades and wire guides TSC8N can switch from working round cables to processing
flat cable in a very easy and quick way.
TECHNICAL FEATURES:
Power supply voltage: 230V / 50Hz (1P + N)
Total nominal power: 400W
Breaking capacity: 6 KA
Voltage control circuit: 24Vdc
Class of protection against indirect contact: I
Degree of solids and liquids declared protection: IP20
Weight: 35 kg
Dimensions: 420mm x 450mm x 350mm
Display: LCD screen Liquid Crystal Display
Cutting length: 1mm - 100 meters
Cutting tolerance: = 0.002xL (L = length of cut)
Stripping Cable: 0 - 100mm
Conductor cross section 0.1-8.0mm² (32-8 awg)
Maximum internal diameter of the thread guides: 7 mm
Middle stripping: 10
Blade Material: High quality Tungsten
Pieces produced per hour: 3.000 - 8.000 pcs / h
Degree of mobility: Transportable Equipment
Connection to the mains supply: Connector jack panel
MGR TCS25
  
Documentation TSC25
Cutting and stripping machine, wire, cable ...
The typical features of TSC25 allow the processing of unipolar cables with
large sections (up to 25mm²) and permit to obtain considerable stripping
of multi-core cables up to 12 mm in diameter (only by managing a machine
parameter that allows middle-stripping).
The possibility to interface TSC25 to our deposit system HTX and to our
unwinder UNROAL allows to unwind, process in automated mode and store cables
with a considerable length by managing everything from the keyboard.
TECHNICAL FEATURES:
Power supply voltage: 230V / 50Hz (1P + N)
Total nominal power: 500W
Breaking capacity: 6 KA
Voltage control circuit: 24Vdc
Class of protection against indirect contact: I
Degree of solids and liquids declared protection: IP20
Weight: 45 kg
Dimensions: 420mm x 450mm x 350mm
Display: LCD screen Liquid Crystal Display
Cutting length: 1 mm - 60 m
Cutting tolerance: = 0.002xL (L = length of cut)
Stripping Cable: Head 0 - 100mm & Tail 0 - 50mm
Section: 0.3 to 25 mm²
Maximum internal diameter of the thread guides: 12 mm
Middle stripping: possible
Blade Material: High quality Tungsten
Pieces produced per hour: 3.000 - 5.000 pcs/h
Degree of mobility: Transportable Equipment
Connection to the mains supply: Connector jack panel
MGR TSC35
  
Documentation TSC35
Cutting and stripping machine, wire, cable ...
The typical features of TSC35 allow the processing of unipolar cables with
large sections (up to 35mm²) and permit to obtain considerable stripping
of multi-core cables up to 13 mm in diameter.
The possibility to interface TSC35 to our deposit system HTX and to our
unwinder UNROAL allows to unwind, process in automated mode and store cables
with a considerable length by managing everything from the keyboard.
TECHNICAL FEATURES:
Power supply voltage: 230V / 50Hz (1P + N)
Total nominal power: 800W
Breaking capacity: 6 KA
Voltage control circuit: 24Vdc
Class of protection against indirect contact: I
Degree of solids and liquids declared protection: IP20
Weight: 57 kg
Dimensions: 510mm x 490mm x 360mm
Display: LCD screen Liquid Crystal Display
Cutting length: 1 mm - 100 meters
Cutting tolerance: = 0.002xL (L = length of cut)
Stripping Cable: 0 - 150mm maxi
Section: 0.5 to 35 mm²
Maximum internal diameter of the thread guides: 13 mm
Middle stripping: possible
Blade Material: High quality Tungsten
Pieces produced per hour: 2.000 pcs / h
Degree of mobility: Transportable Equipment
Connection to the mains supply: Connector jack panel
MGR TSC50
  
Documentation TSC50
Cutting and stripping machine, wire, cable ...
The typical features of TSC50 allow the processing of unipolar cables with
large sections (up to 70mm²) and permit to obtain considerable stripping
of multi-core cables up to 17 mm in diameter.
The possibility to interface TSC50 to our deposit system HTX and to our
unwinder UNROAL allows to unwind, process in automated mode and store cables
with a considerable length by managing everything from the keyboard.
TECHNICAL FEATURES:
Power supply voltage: 230V / 50Hz (1P + N)
Total nominal power: 1000W
Breaking capacity: 6 KA
Voltage control circuit: 24Vdc
Class of protection against indirect contact: I
Degree of solids and liquids declared protection: IP20
Weight: 72 kg
Dimensions: 510mm x 490mm x 360mm
Display: LCD screen Liquid Crystal Display
Cutting length: 1 mm - 100 meters
Cutting tolerance: = 0.002xL (L = length of cut)
Stripping Cable: 0 - 150mm maxi
Section: 2.5 to 70 mm²
Maximum internal diameter of the thread guides: 17 mm
Middle stripping: possible
Blade Material: High quality Tungsten
Pieces produced per hour: 2.000 pcs / h
Degree of mobility: Transportable Equipment
Connection to the mains supply: Connector jack panel
TSC-INSIDE
  
Documentation TSC-INSIDE
Cutting and stripping machine,
multi-conductrs cable
TSC INSIDE is a cutting and stripping machine that allows the external
stripping of the insulation and the stripping of the internal conductors on
multipolar cables (of two or more poles) by means of their previous flattening
before coming into contact with the flat part of the machine blades.
TSC INSIDE can process flat or round multipolar cables and can carry out long
stripping on the external insulation.
TECHNICAL FEATURES:
Power supply voltage: 230V / 50Hz (1P + N)
Total nominal power: 680W
Breaking capacity: 6 KA
Voltage control circuit: 24Vdc
Class of protection against indirect contact: I
Degree of solids and liquids declared protection: IP20
Weight: 35 kg
Dimensions: 470mm x 450mm x 350mm
Display: LCD screen Liquid Crystal Display
Cutting length: 1mm - 100 meters
Cutting tolerance: = 0.002xL (L = length of cut)
Stripping head: 0 - 250mm / tail 0 - 70mm
Section: 0.1 to 6 mm² (unipolar)
Blade Material: High quality Tungsten
Pieces produced per hour: 2.000 - 8.000 pcs / h
Degree of mobility: Transportable Equipment
Connection to the mains supply: Connector jack panel