2. Products
  3. PCB depaneling
  4. Piergiacomi

Piergiacomi PCB depaneling machine for V-groove, V-CUT and Tab-route, TABs PCB FR4 / SMI


PCB separators Piergiacomi


PCB SEPARATORS POST STAMP & V-SCORING


stelvio
DP 10 N     DP 15 N     DP 18 N     DP 20 N     DP 23 N     DP 24 N     DP 25 N

PCB FR4 ou SMI separator stamp format
Manual hand tools
Isthmus max : 3.5mm
Range of tickness : from 1 to 2.5mm        




stelvio
DPP 20 N     DPP 23 N     DPP 24 N     DPP 25 N

PCB FR4 ou SMI separator stamp format
Pneumatic tools
Isthmus max : 3.5mm
       
    VIDEO DPP                




DPF300
DPF300 -   manual PCB trimming system

Piergiacomi DFP300

The DPF 300 electric can solve the needs in small series where the use of a clamp could damage the product and where the use of an automatic depanelizer.
The cutting quality is the same as with an automatic system, but at a lower cost.
Compatible with FR4 card and SMI aluminum PCB.
       
   DPF 200 (old model) - Complex shapes
   DPF 200 (old model) - Small boards
   DPF 300

  Brochure DPF 300 (French)




Electric depaneling machine SMA10L V-SCORING



SMA10L manual PCB trimming system

SMA10DL manual PCB trimming system
SMA10L et SMA10DL

SMA10L et SMA10DL

SMA-10L PCB Separator for v-scoring boards, equipped with 2 blades.
Expecially designed for long boards (Lighting industry), up to 600mm length.
Thanks to its unique design, SMA-10L can depanel both short and long boards, bare or populated.
In this last case the maximum component heigth is 32mm.
The alignment system allows three degrees of regulation.
The first regulation is the height of the reference plan in relation to the cutting tool; this is achieved by an apposite knob. Then a guide allows to easily position the scored line aligned with the cutting tool and finally a mechanical reference assures the correct positioning of the panel.
The guide can be easily adjusted to compensate different scoring depth.

SpecificationsSMA-10 L / SMA 10 DL :
  • Power: <100W / Voltage: 230V
  • Works on CEM and FR4 PCBs (SMI)
  • With 2 or 4 blades, 125mm diameter
  • PCB thickness (bare): from 0.8 to 1.6 mm
  • Max. PCB dimensions: 220 x 230 mm
  • Max. PCB dimensions (with 2 table extensions): 600 x 230 mm
  • Manual Z control (blades adjustment): 10mm
  • Manual table's height adjustment: 10mm
  • Working area: 750 x 1200 mm
  • Manufacturer: Piergiacomi / Made in Italy
  • CE mark.

    •   Brochure SMA 10 L / SMA 10 DL