ZIPA TEC selective soldering Select 460 SW

Select 460 SW

The Most Economical Step into Selective Soldering!

Automated selective soldering is currently one of the most interesting areas in electronic production. It con-tributes substantially to process reliability and raises product quality to a higher level. The high capital investment involved, however, has prevented high-end selective soldering systems from being commonly used in smaller companies.
ZIPA-TEC’s selective soldering series is now provides new possibilities - especially for manufactures with limited budgets. The Select 460 SW is an introductory semi-automatic selective soldering system which allows for both single spot and heavy-mass soldering.
By Permanent improvement from the Select-Series Zipa-Tec is one of the leaders for selective soldering machines.

With the Select 460 SW Zipa-Tec created a combination from Selective-Soldering machine and Wave-Soldering machine.

With the Select 460 SW you have the possibility to use two different Flux- Systems; one is the very accurate Micro Drop Fluxer or our standard Spray-Fluxer for fluxing bigger areas. For working with the 300mm wave module a wave-Fluxer will be used.

The size of the preheater can be selected on you`re application range. The Select 460 SW can be configured with a small quartz-Preheater and a large area preheater with additional top-side preheater is possible. The Select 460 SW you can configure with our Pyrometer-system, which measures the temperature on your PCB. With this option soldering heavy boards with high copper areas lead-free is possible.

The basic machine Select 460 SW has one selective module and on wave module, both are completely made out of titan and consequently applicative for lead-free solder. For reducing oxidation on the soldering module the pot is completely covered and flooded with Nitrogen. Through this the maintenance effort is reduced to a minimum. Solder nozzles in all versions and dimensions are available.

With the one and only offline programming the PhotoEditor you can create a finish solder program in Minutes, you can import a scan from you`re board or a PDF-file from you CAD-System. For fine tuning you can edit every individual step.